SEPTA Regional Rail
From Wikipedia, the free encyclopedia
 |
|
| Locale | Philadelphia and suburbs |
|---|---|
| Transit type | commuter rail |
| Began operation | 1965 |
| No. of lines | 7 (13 branches) |
| No. of stations | 153 |
| Track gauge | 4 ft 8½ in (1435 mm |
| Operator | SEPTA |
The Southeastern Pennsylvania Transportation Authority (SEPTA) Regional Rail Division provides commuter rail service on thirteen branches to over 150 active stations in Philadelphia, Pennsylvania and its suburbs. Service on most lines runs from 5:30 AM to Midnight. The core of the Regional Rail system is the Center City Commuter Connection and the Center City stations 30th Street Station, Suburban Station, and Market East Station. Almost all trains stop at these Center City stations, and most also stop at Temple University Station on the campus of Temple University in North Philadelphia.
The 13 branches can be divided into those originally owned and operated by the Pennsylvania Railroad, which would become Penn Central, and those of the Reading Company. Before the Center City Commuter Connection opened in November 1984, the Pennsylvania Railroad commuter lines and the Reading commuter lines were two completely separate railroads. Each had a separate Center City terminal, with the Pennsylvania Railroad lines terminating at Suburban Station, while the Reading lines terminated at Reading Terminal. The Reading Terminal was replaced by the Market East Station, which is part of the Center City Commuter Connection and sits partially under the former Reading Terminal. The Center City Commuter Connection united the two systems by turning the two terminal stations into through-stations.
Contents |
[edit] Routes
There are 13 branches on the Regional Rail system, with seven on the Pennsylvania Railroad (PRR) side and six on the Reading Company side. Each PRR branch is paired up with a Reading branch and numbered from R1 to R8, except for R4, so that one route number describes two branches, one on the PRR side and one on the Reading side. This can lead to some confusion when referring to branches and finding which train to board, since there are two outlying endpoints for each route, and one has to remember the side or direction in addition to the R-number.
The Pennsylvania Railroad lines:
- R1 Airport Line: terminates at the Philadelphia International Airport.
- R2 Wilmington and Newark: terminates in Newark, Delaware.
- R3 Media-Elwyn: terminates in Elwyn. Until 1986, trains continued on to West Chester.
- R5 Paoli-Thorndale: most trains terminate in Malvern and a few go to Thorndale. Until 1992, some trains continued on to Coatesville and Parkesburg.
- R6 Cynwyd: terminates in Bala Cynwyd. Until 1986, trains continued on to Ivy Ridge station in northwestern Philadelphia.
- R7 Trenton: terminates in Trenton, New Jersey. This line offers an inexpensive connection to New York Penn Station via New Jersey Transit's Northeast Corridor Line.
- R8 Chestnut Hill West: terminates in the Chestnut Hill part of Philadelphia.
The Reading Company lines:
- R1 Glenside: terminates at Glenside.
- R2 Warminster: terminates in Warminster.
- R3 West Trenton: terminates at the West Trenton station in Ewing, New Jersey.
- R5 Lansdale-Doylestown: about half the trains terminate at Lansdale while the other half continue on to Doylestown.
- R6 Norristown: terminates at Elm Street in Norristown.
- R7 Chestnut Hill East: terminates in the Chestnut Hill part of Philadelphia.
- R8 Fox Chase: terminates in the Fox Chase section of Philadelphia. Until 1983, trains continued on to Newtown, Pennsylvania.
There are 153 active stations on the Regional Rail system (as of 2006), of which 51 are in the city of Philadelphia, 41 are in Montgomery County, 29 are in Delaware County, 16 are in Bucks County, 10 are in Chester County, and 6 are outside the state of Pennsylvania. Passenger boardings within Philadelphia account for 61% of all trips on a typical weekday in 2003, with 45% from the three Center City stations and Temple University station.
| County | Stations | Boardings in 2003 | Boardings in 2001 |
| Philadelphia | 51 | 60 967 | 61 970 |
| Montgomery County | 41 | 17 228 | 18 334 |
| Delaware County | 29 | 8 310 | 8 745 |
| Bucks County | 16 | 5 332 | 5 845 |
| Chester County | 29 | 5 154 | 5 079 |
| Outside Pennsylvania | 6 | 2 860 | 3 423 |
| total | 153 | 99 851 | 103 396 |
[edit] Equipment
SEPTA utilizes a mixed fleet of "Silverliner" multiple-unit (m.u.) cars and push-pull equipment consisting of coaches built by Bombardier and hauled by AEM-7 electric locomotives identical to those used by Amtrak on its Northeast Corridor. The "Silverliner" coaches, first used by the PRR in the 1950's as the "Pioneer III," were purchased by SEPTA in the early 1960's for both the PRR and Reading lines and were built by the Budd Corporation in Philadelphia. In 1967, the PRR took delivery of the "Silverliner III" cars, which featured left-hand side controls (railroad cars traditionally have right-hand side controls). The bulk of the fleet, the "Silverliner IV", were built by General Electric and were delivered in 1974-76, prior to the formation of Conrail. The "Silverliner II", "Silverliner III", and "Silverliner IV" cars are used on all Regional Rail lines, while the Bombardier push-pull equipment is used exclusively for R3 West Trenton, R5 Paoli/Thorndale, and R7 Trenton peak express service. The push-pull equipment is used only for express runs because its slow acceleration, compared to the Silverliner m.u. equipment, makes it less suitable for local service with its close station spacing and frequent stops and starts. Some "Silverliner III" cars were even converted for exclusive R1 Airport use – they featured special luggage racks, yellow window paintings, and the "PHL" logo used for the Philadelphia International Airport. Currently, all cars have a blended red and blue SEPTA logo. SEPTA also owns an "Arrow III" m.u. car built by Budd, but has not seen service on any of its lines. The "Arrow III" car is nearly identical to that of the "Silverliner IV", but lacks the distinctive dynamic brake roof "hump" on the car, and has a "diamond" pantograph instead of the "T" pantograph used on the "Silverliner."
With the exception of the "Pioneer III" coaches, which have since been retired, all three Silverliner models are compatible with one another. As of 2006, SEPTA has plans to retire the "Silverliner II" and "Silverliner III" models in favor of a new "Silverliner V" model, which will have many differences from the current models. One major change is that the doors will be located at the quarter-points of the car instead of at the ends. There will be three doors on each side, two of which will have steps to allow them to be used at both low level and high level stations. The interiors will have a wider aisle in the center section of seats and have a space for wheelchairs. The interior layout of the new "Silverliner V" cars are based on the Budd "Arrow" m.u. cars owned and operated by New Jersey Transit, hence the purchasing of the lone "Arrow III" car by SEPTA. The new cars will be built by the South Korean firm Rotem with final assembly to be done at the former Philadelphia Naval Shipyard in South Philadelphia, near the former GE assembly facility where the "Silverliner IV" cars were built.
All current SEPTA equipment is compatible with the power supplies on both the ex-PRR (Amtrak-supplied) and ex-Reading (SEPTA-supplied) sides of the system. The entire system uses 12,000-volt/25 Hz power lines that were erected by the PRR and Reading Railroads between 1915 and 1935, with the system "phase break" being located at the northern entrance to the Center City commuter tunnel between the Market East Station and the Temple University Station.
[edit] Speed limits
SEPTA push-pull coaches are designed for a maximum speed of 100 mph, and the Silverliner II, III, and IV cars are designed for 85 mph. However, most of SEPTA trackage is limited to a lower speed due to track conditions such as sharp curves.
These speed limits only apply to passenger trains. Freight trains have much lower limits. Also, slow orders and switch speed limits are not included below.
[edit] SEPTA main line
This line runs from 30th Street Station to Glenside.
- 30th Street Station to Market East: 20 mph with 15 mph in curves.
- Market East to Temple University: after a 15 mph curve, the speed limit is 45 to 50 mph going northbound (uphill) and 35 mph southbound (downhill) up to MP 1.7, due to a 2.8% gradient. North of that, the limit is 45 mph.
- Temple University to 16th Street Junction: 45 mph with some 40 mph curves. Track 4 is limited to 30 mph due to tight S curves around the station platforms at Temple University. 30 mph through 16th St Jct interlocking.
- 16th Street Junction to Wayne Junction: 50 mph with 30 mph restriction through interlockings.
- Wayne Junction north: 60 mph with some 45 mph curves.
[edit] Branch lines
Generally, routes which take diverging routes at switches or use slip switches must slow down to 30 mph or 45 mph, depending on the switch design.
- R2 Newark: 90 to 100 mph, with many restrictions. From 30th St Station to Sharon Hill, 40 to 90 mph. Wilmington 30 mph. Churchman's Crossing to Newark, 35 to 80 mph.
- R3 Elwyn: 50 mph.
- R5 Paoli-Thorndale: 70 mph, except for 90 mph section west of Downingtown. Some 50 and 55 mph curves.
- R7 Trenton: 90 to 100 mph, with many restrictions. 30 mph in Zoo, then 70 mph to North Philadelphia station, 40 mph through Frankford Junction, then 50 to 90 mph to Bridesburg. 80 mph in Trenton.
- R7 Chestnut Hill East: 40 mph. Three 15 mph curves, one 35 mph curve.
- R8 Chestnut Hill West: 50 mph. Some 30 and 40 mph curves, and a 15 mph curve at North Philadelphia station, which also has a 3.47% gradient uphill going northbound.
[edit] History
SEPTA was created to provide government subsidies to passenger railroads and transit operations, and in 1966 had contracts with the Pennsylvania Railroad and the Reading Company to continue commuter rail services in the Philadelphia region.
[edit] The Pennsy and the Reading
The Pennsylvania Railroad ("The Pennsy", or PRR) and the Reading Company (RDG) operated both passenger and freight trains along its tracks in the Philadelphia region. To improve the efficiency of their commuter passenger lines, both companies added electrification to their busiest lines. The system used is an overhead catenary trolley wire that is energized at 11,000 V single-phase AC at 25 Hertz (Hz), very uncommon by todays standards as regular American households use double-phase AC at 60 Hz. The Pennsylvania Railroad started using this system on the Paoli line in 1915, the Chestnut Hill West line in 1918, and the Media - West Chester and Wilmington lines in 1928. Both the Pennsy and the Reading Company continued their electrification projects into the 1930s, replacing trains pulled by steam locomotives with electric multiple unit cars and locomotives. PRR electrification reached Trenton and Norristown in 1930. Reading began electrified operation in 1931 to West Trenton, Hatboro and Doylestown, and in 1933 to Chestnut Hill East and Norristown.
Carrying passengers has been unprofitable for the railroads since about 1950, due to the rise in automobile ownership and the building of the Interstate Highway System. This, combined with deferred maintenance during World War II, meant that the railroad infrastructure and rolling stock were in bad shape and the services were not much better. The railroads were losing money and keen to get rid of their passenger operations so that they could focus on more profitable freight service, and the neglect of their passenger service was becoming an issue with commuters and local governments.
On February 1, 1968, the Pennsylvania Railroad merged with the New York Central railroad to become Penn Central, in an effort to remain solvent. Only two years later, Penn Central filed for bankruptcy on June 21, 1970.
In 1971, the Reading Company filed for bankruptcy after being unprofitable for several years, mostly due to the selling, by the Chesapeake & Ohio Railroad (now CSX) of its minority stakes in the Reading system after the Baltimore & Ohio Railroad was absorbed by the C & O in the 1960's. The B & O used the Reading's (and its Jersey Central Railroad subsidiary) tracks from Philadelphia to Jersey City, New Jersey for its Washington-New York service, but eliminated passenger service in 1951.
[edit] Conrail
In 1976, Conrail took over the railroad-related assets and operations of the bankrupt Pennsylvania and Reading railroads, including the commuter rail operations. Conrail provided commuter rail services under contract to SEPTA until 1983, when SEPTA took over.
The SEPTA takeover was overseen by David L. Gunn, general manager from 1979 to 1984. When SEPTA assumed operations of the commuter lines, they attempted to impose transit (bus and subway driver's) pay scales and work rules, which was met by resistance by the BLE, who called a strike that lasted for 108 days. In the end, SEPTA would treat them as proper railroad workers, but their pay scale is still lower than that of other Northeast commuter railroads such as NJ Transit. SEPTA's Regional Rail also suffered ridership losses which would take several years to rebuild.
[edit] The end of diesel routes
SEPTA's current regional rail system is entirely run with electric-powered multiple unit cars and locomotives. Diesel trains were last run in 1983, on the Fox Chase-Newtown line.
In the 1970s, Conrail, under contract to SEPTA, operated diesel-hauled trains on the former Reading lines from Philadelphia's Reading Terminal to:
- Allentown via Bethlehem, Quakertown and Lansdale. Allentown service ended 1979, and Bethlehem and Quakertown service ended 1981.
- Pottsville via Reading and Norristown, ended 1981.
- Jersey City, New Jersey (to the CNJ terminal) via West Trenton. Service past West Trenton ended 1981.
Most trains were either Budd Rail Diesel Cars, or locomotive-hauled push-pull trains with former Reading F7's.
[edit] Expansion and cutbacks in the 1980s
On November 1984, the Center City Commuter Connection, an underground connection between the Pennsy and Reading lines, along with a new station at Market East, opened. Previously, Pennsy commuter trains would terminate at Suburban Station and Reading trains at Reading Terminal. The connection converted Suburban Station into a through-station and rerouted Reading trains down a steep incline and into a tunnel which turns sharply west near the new Market East Station. Converting terminals into through station increases the efficiency of and reduces the number of tracks needed for the trains. [1]
On April 28, 1985, the R1 Airport line opened, providing service from Suburban Station via 30th Street Station to the Philadelphia International Airport. This line runs along Amtrak's NEC to a bridge which carries it over the NEC and onto Reading trackage which passes close to the airport. At the airport, a new bridge carries it over I-95 and into the airport terminals between the baggage claim in arrivals and the check-in counters in departures.
Declining ridership, a series of track and bridge washouts, and other results of deferred maintenance resulted in additional service cutbacks in the 1980s:
- R3 West Chester service was cut back to Elwyn in 1986 due to unsatisfactory track conditions west of Elwyn.
- R6 Ivy Ridge service was cut back to Cynwyd on May 17, 1986 due to concerns about the Manayunk bridge over the Schuylkill River.
- R8 Newtown diesel service was cut back to Fox Chase in February 1983, due to lack of ridership, and SEPTA's desire to operate electrified-only service. Though this service was initially terminated along with diesel services to Allentown and Pottsville in 1981, SEPTA reinstated service using operators from the transit division. This caused a rift in unions with the organization, adding to the disastrous 1983 strike.
[edit] RailWorks
The decades of deferred maintenance resulted in the need to completely rebuild the Reading viaduct in North Philadelphia, a project that SEPTA called RailWorks. This was a $354 million, 10-month project split into two phases and spread out over two years, 1992 and 1993. The Reading viaduct is a series of bridges and embankments that allows trains to run on elevated railroad tracks, separated from road traffic and pedestrians. The viaduct was completely shut down during each phase, with the R6 Norristown, R7 Chestnut Hill East, and R8 Fox Chase lines suspended during the shutdown. Other Reading lines only came as far into the city as Fern Rock station, where riders had to transfer to the Broad Street Subway.
During RailWorks, SEPTA ran a few diesel trains during peak-hours from the Reading side branches, along non-electrified Conrail trackage, to 30th Street Station.
[edit] Original route numbering plan
Regional Rail lines are numbered from R1 to R8, with the notable omission of R4. The reasons for this are rather complicated, going back to the original planning stages.
Part of the planning for the Center City Commuter Connection was to decide on how trains would be routed through the tunnel which branches would be paired up.
The original plan for the system was made by University of Pennsylvania professor Vukan Vuchic, based on the S-Bahn commuter rail systems in Germany. Numbers were assigned to the PRR-side lines in order from south (Airport) to northeast (Trenton), and the RDG-side matches were chosen to roughly balance ridership, to attempt to avoid trains running full on one side and then running mostly empty on the other. The following lines were recommended:[2]
- R1 Airport to West Trenton
- R2 Marcus Hook (now Newark) to Warminster
- R3 Media/West Chester (now Elwyn) to Chestnut Hill West
- R4 Bryn Mawr (on the same tracks as the R5 Paoli) to Fox Chase
- R5 Paoli (now Thorndale) to Lansdale/Doylestown - express from Center City to Bryn Mawr, with R4 running local
- R6 Ivy Ridge (now Cynwyd) to Norristown
- R7 Trenton to Chestnut Hill East
In addition to the Center City Commuter Connection, it was assumed that SEPTA would build one more connection, the Swampoodle Connection. This would allow PRR-side trains from Chestnut Hill West to join the RDG Norristown line instead of the PRR mainline at North Philadelphia station. The Chestnut Hill West line and the Norristown line run adjacent to each other at that point, in the Philadelphia neighborhood of Swampoodle. The Swampoodle Connection was never built, leading (among other factors) to the following changes:
- R3 could not go to Chestnut Hill West, so R3 trains from Media/West Chester instead went to West Trenton along the R1. Service to Chestnut Hill West was picked up by the R8.
- R4 was dropped; The R5 Paoli runs local along its entire length most of the time, and Fox Chase became half of the R8.
- R8 was added for Fox Chase to Chestnut Hill West service, using the former R4-Fox Chase and R3-Chestnut Hill West halves.
One of the assumptions in this plan was that ridership would increase after the connection was open. Instead, ridership dropped after the 1983 strike and has to this day never regained the 1970s levels. Because of this, most trains are 2 or 3 car lengths, with trains on many routes running mostly empty during the midday and evenings, and pairing up based on ridership is less relevant today.
Several expansion plans have proposed using the R4 designation for a new line.
At a later time, R1 was applied to the former RDG tracks, shared with the R2 and R5 lines to Glenside (SEPTA station), and R3 to Jenkintown, and R1-Airport trains ran to Glenside rather than becoming R3 trains to West Trenton. In later years, SEPTA became more flexible, and now a decent number of trains change number designations downtown to cope with differences in ridership on various lines.
Since the original service, the following termini have changed:
- R2-Marcus Hook was extended to Wilmington and Newark
- R3-West Chester was truncated to Elwyn
- R5-Paoli was extended to Downingtown and Parkesburg, and later truncated to Thorndale
- R6-Ivy Ridge was truncated to Cynwyd
[edit] Ridership
Overall ridership on SEPTA peaked in 1980, with over 373 million unlinked trips per year. The Regional Rail Division also had its highest ridership in 1980, with over 32 million passengers. Regional Rail ridership declined to a low of just under 13 million passengers in 1983, partly due to a drawn-out strike by the railroad unions, partly due to discontinuing service to many stations and outlying points, and partly due to the decreasing price of gasoline and its effect of increasing automobile usage.
In 1992, ridership dipped again due to economic factors and due to SEPTA's RailWorks project, which shut down half of the railroad over two periods of several months each in 1992 and 1993. A mild recession in 1992-94 also dampened ridership, but a booming economy in the late 1990s helped increase ridership to near the peak level in 1980.
In 2000, ridership started a slight decline due to the slow economy, but in 2003 ridership started increasing again. The average weekday passenger counts have not increased at the same rate as the total annual passenger counts, which may mean that weekend ridership is increasing.
The total unlinked trips on each division for each fiscal year are:
| Fiscal year | City Transit | Victory | Frontier | Railroad | Total |
|---|---|---|---|---|---|
| 1979 | 306,662,954 | 17,449,413 | 1,305,566 | 31,539,688 | 356,957,621 |
| 1980 | 320,857,512 | 18,560,506 | 1,445,188 | 32,194,460 | 373,057,666 |
| 1981 | 278,866,193 | 14,295,933 | 1,367,800 | 27,109,824 | 321,639,750 |
| 1982 | 296,536,691 | 17,001,555 | 1,434,986 | 21,826,854 | 336,800,086 |
| 1983 | 312,995,769 | 18,119,737 | 1,675,764 | 12,856,207 | 345,647,477 |
| 1984 | 322,918,885 | 18,518,234 | 2,026,374 | 15,960,307 | 359,423,800 |
| 1985 | 327,605,093 | 17,877,740 | 2,063,000 | 18,788,437 | 366,334,270 |
| 1986 | 312,094,571 | 14,136,264 | 2,126,953 | 22,522,596 | 350,880,384 |
| 1987 | 311,444,133 | 15,279,639 | 1,979,042 | 22,932,834 | 351,635,648 |
| 1988 | 309,784,121 | 15,865,410 | 2,027,073 | 23,797,289 | 351,473,893 |
| 1989 | 302,525,081 | 15,906,774 | 2,117,211 | 24,143,591 | 344,692,657 |
| 1990 | 290,138,705 | 14,501,181 | 2,317,932 | 24,381,416 | 331,339,234 |
| 1991 | 271,584,306 | 14,869,870 | 2,467,555 | 23,312,199 | 312,233,930 |
| 1992 | 260,260,020 | 14,660,266 | 2,469,902 | 21,128,888 | 298,519,076 |
| 1993 | 272,089,292 | 14,730,858 | 2,558,299 | 19,185,111 | 308,563,560 |
| 1994 | 267,920,532 | 14,662,759 | 2,676,023 | 20,875,493 | 306,134,807 |
| 1995 | 252,499,436 | 14,086,164 | 2,566,229 | 22,558,492 | 291,710,321 |
| 1996 | 251,950,239 | 13,169,533 | 2,658,166 | 22,545,896 | 290,323,834 |
| 1997 | 252,309,545 | 13,680,103 | 3,035,456 | 23,012,000 | 292,037,104 |
| 1998 | missing data | ||||
| 1999 | 25,088,000 | ||||
| 2000 | 29,437,000 | ||||
| 2001 | 28,671,000 | ||||
| 2002 | missing data | ||||
| 2003 | 28,058,200 | ||||
| 2004 | 28,234,986 | ||||
| 2005 | 28,632,658 | ||||
Source: SEPTA 1997 Ridership Census, Annual Service Plans FY 2001 through 2005.
[edit] Timeline
- 1966: SEPTA begins contracts with the Pennsylvania Railroad and the Reading Company to subsidize commuter lines.
- 1974-1976: SEPTA orders and takes delivery of Silverliner IV M.U.s
- 1976: Conrail takes over bankrupt railroads and continues providing commuter services for SEPTA.
- 1979: Service from Bethlehem to Allentown is discontinued. R2 Naamans Road station closes.
- 1980: 52nd Street station closes. Ivy Ridge station opens and service is extended to it on what is now the R6 Cynwyd.
- 1981: Service from Hatfield to Bethlehem, PA, and from Norristown to Reading and Pottsville is discontinued. R2 Baldwin station closes. R5 Exton station opens. Fares increased.
- January 1, 1983: SEPTA officially takes over commuter lines from Conrail.
- 1983: Service from Fox Chase to Newtown on the R8 is discontinued. R5 Thorndale station opens. R8 Westmoreland station closes. BLE calls a strike that lasts 108 days.
- November 1984: The Center City Commuter Connection opens.[3]
- November 16, 1984: The Columbia Avenue (now Cecil B. Moore Ave.) bridge near old Temple University station found to be unsafe, putting all 4 tracks out of service north of Market East Station.[4]
- December 1984: Temporary bridge opens, allowing service to resume north of Market East Station.[5]
- April 28, 1985: The R1 opens to Philadelphia International Airport.[6]
- 1986: Service from Elwyn to West Chester on the R3 is discontinued.
- May 17, 1986 Service from Cynwyd to Ivy Ridge on the R6 is discontinued.
- 1990: Service on the R5 is extended from Thorndale to Parkesburg.
- 1990: Reading-era "Blueliner" and PRR-era Pioneer III/Silverliner I M.U.s retired.
- March 12, 1992: New Fern Rock station opens, replacing both the old Fern Rock and Tabor stations.
- 1992: First phase of RailWorks, a project to reconstruct several bridges and viaducts on the former Reading Company's main line in North Philadelphia, shuts down the railroad between Market East and Fern Rock stations for six months.
- May 2, 1993 Second and last phase of Railworks begins.
- September 9, 1993 Second and last phase of Railworks ends.
- November 10, 1996: Service on the R5 to Parkesburg is cut back to Downingtown (later restored to Thorndale at a new station). Fellwick, Fishers, Fulmore, and Shawmont stations close.
- March 21, 1997: Parking added to Exton station, adding 116 spaces at a cost of $300,000.
- 1997: Eastwick station opens on the R1 Airport line.
- 2002: SEPTA announces the planned building of 125 new "Silverliner V" m.u. cars to replace aging Budd-built "Silverliner II" and St. Louis Company-built "Silverliner III" cars. New cars, identical to the GE-built "Silverliner IV" cars, will have wider seats and a center-opening door for easier boarding or departing at high-level platform stations in Center City.
- 2003: R2 Lamokin and R7 Wissinoming stations close.
- 2006: SEPTA board of directors approve contract for ROTEM to build 125 new "Silverliner V" cars. Contract calls for building of car bodies in South Korea with final assembly and testing done at the former Philadelphia Naval Ship Yard complex in South Philadelphia. SEPTA also started negotiations with Wawa Food Markets to purchase land in Wawa, Pennsylvania (the location of the "Red Roof" corporate office) to build a new Park-and-Ride facility for a planned restoration in R3-Media/Elwyn service to Wawa.
 |
Southeastern Pennsylvania Transportation Authority |
| City Division | Market-Frankford Line - Broad Street Line - Subway-Surface Lines - Girard Avenue Trolley (Route 15) |
| Suburban Divisions | Norristown High Speed Line (Route 100) - Suburban Trolley Lines (Routes 101 & 102) |
| Regional Rail | R1 - R2 - R3 - R5 - R6 - R7 - R8 |
| Major Stations | Market East Station - Suburban Station - 30th Street Station |
