Nuclear weapon design
From Wikipedia, the free encyclopedia
Nuclear weapon designs are physical, chemical, and engineering arrangements which allow for the detonation of a nuclear weapon. They are often divided into two classes, based on the dominant source of the weapon's energy.
- Fission bombs derive their power from nuclear fission, where heavy nuclei (uranium or plutonium) are bombarded by neutrons and split into lighter elements, more neutrons and energy. These newly liberated neutrons then bombard other nuclei, which then split and bombard other nuclei, and so on, creating a nuclear chain reaction which releases large amounts of energy. These are historically called atomic bombs, atom bombs, or A-bombs, though this name is not precise due to the fact that chemical reactions release energy from atomic bonds (excluding bonds between nuclei) and fusion is no less atomic than fission. Despite this possible confusion, the term atom bomb has still been generally accepted to refer specifically to nuclear weapons, and most commonly to pure fission devices.
- Fusion bombs are based on nuclear fusion where light nuclei such as deuterium and tritium (isotopes of hydrogen) combine together into heavier elements and release large amounts of energy. Weapons which have a fusion stage are also referred to as hydrogen bombs or H-bombs because of their primary fuel, or thermonuclear weapons because fusion reactions require extremely high temperatures to occur.
The distinction between these two types of weapon is blurred by the fact that they are combined in nearly all complex modern weapons: a smaller fission bomb is first used to reach the necessary conditions of high temperature and pressure which are required for fusion. Fusion elements may also be present in the core of fission devices as well as they generate additional neutrons which increases the efficiency (known as "boosting") of the fission reaction. Additionally, most fusion weapons derive a substantial portion of their energy (often around half of the total yield) from a final stage of fissioning which is enabled by the fusion reactions. Since the distinguishing feature of both fission and fusion weapons is that they release energy from transformations of the atomic nucleus, the best general term for all types of these explosive devices is nuclear weapon.
Other specific types of nuclear weapon design which are commonly referred to by name include: neutron bomb (enhanced radiation weapon), cobalt bomb, and salted bomb.
Contents |
[edit] Fission weapons
The simplest nuclear weapons are pure fission bombs. These were the first types of nuclear weapons built during the Manhattan Project and they are a building block for all advanced nuclear weapons designs.
[edit] Critical mass
A mass of fissile material is called critical when it is capable of a sustained chain reaction, which depends upon the size, shape, and purity of the material as well as what surrounds the material. A numerical measure of whether a mass is critical or not is available as the neutron multiplication factor, k, where
- k = f − l
where f is the average number of neutrons released per fission event and l is the average number of neutrons lost by either leaving the system or being captured in a non-fission event. When k = 1 the mass is critical, k < 1 is subcritical and k > 1 is supercritical. A fission bomb works by rapidly changing a subcritical mass of fissile material into a supercritical assembly, causing a chain reaction which rapidly releases large amounts of energy.
In practice the mass is not made slightly supercritical, but goes from slightly subcritical (k = 0.9) to highly supercritical (k = 2 or 3), so that each neutron creates several new neutrons and the chain reaction advances more quickly. The main challenge in producing an efficient explosion using nuclear fission is to keep the bomb together long enough for a substantial fraction of the available nuclear energy to be released.
Prior to detonation a nuclear weapon consists of one or more pieces of weapon-grade fissionable material which are subcritical in configuration. The main method is the implosion method, where there is one sphere of material, which is compressed to make it supercritical. A simpler method is the gun method, where there are two pieces, one subcritical because of the limited mass, the other subcritical because of being unfavorably shaped (or in small-yield weapons, also because of mass), but such that the pieces together are favorably shaped: the first piece fits in a hole of the second piece. More generally, also e.g. two subcritical hemispheres might be used, or more than two pieces.
To produce an efficient nuclear detonation, the fissile material must be brought into its optimal supercritical state very rapidly. This must be done to avoid predetonation; this means that the fission chain reaction starts too soon: the material will heat up and expand rapidly before being in its optimal state. Thus only a small, sometimes very small part of the fissionable material actually undergoes fission, and the yield is correspondingly low.
For a quick start of the chain reaction at the right moment, a neutron trigger / initiator is used, see below.
The majority of the technical difficulties of designing and manufacturing a fission weapon are based on the need to both reduce the time of assembly of a supercritical mass to a minimum and reduce the number of stray (pre-detonation) neutrons to a minimum.
The isotopes desirable for a nuclear weapon are those which have a high probability of fission reaction, yield a high number of excess neutrons, have a low probability of absorbing neutrons without a fission reaction, and do have a low spontaneous fission rate. The primary isotopes which fit these criteria are U-235, Pu-239 and U-233.
[edit] Fissile materials
A fissile material is one that can support a fission chain reaction. Uranium-235 and plutonium-239 are the fissile materials most often used in nuclear bombs, and producing or procuring them is usually the most difficult part of a weapons development program. During the Manhattan Project, for example, around 90% of the total program budget was devoted to the production of U-235 and Pu-239. Modern pits (see below) often combine the two.
Test bombs using uranium-233 have also been detonated by the US, and it may be a component of India's weapons program as well.
Several other isotopes have been considered as potentially usable in fission weapons, though no country has been known to produce them for this purpose. The fact that neptunium-237 "can be used for a nuclear explosive device" was declassified by the U.S. Department of Energy in 1992.[1]
[edit] Uranium-235
Naturally occurring uranium consists mostly of the isotope U-238 (99.29%), with only a small part being the fissile isotope U-235 (0.71%). The U-238 isotope has a high probability of absorbing a neutron without a fission, and also a higher rate of spontaneous fission. As such, the presence of too much U-238 in a fission weapon will impede the chain reaction and result in a fizzle. For weapons, uranium is enriched through one of many varieties of isotope separation, most of which rely on the fact that U-235 is slightly lighter than U-238. This is often the most difficult part of any nuclear weapons production program, as all forms of isotope enrichment require considerable technological investment and capability.
Uranium which is more than 20% U-235 is called highly enriched uranium (HEU), and weapons grade uranium is at least 93.5% U-235. U-235 has a spontaneous fission rate of 0.16 fissions/s-kg, which is low enough to make super critical assembly relatively easy. The critical mass for an unreflected sphere of U-235 is about 50 kg, which is a sphere with a diameter of 17 cm. The critical size can be reduced to about 15 kg with the use of a neutron reflector surrounding the sphere.
When compressed as in the implosion method, the critical mass is reduced, so these values do not indicate the amounts needed for a weapon.
[edit] Plutonium-239
Plutonium (atomic number 94, two above uranium) occurs naturally only in small amounts within uranium ores. Military or scientific production of plutonium is achieved by exposing purified U-238 to a strong neutron source, such as in a breeder reactor. When U-238 absorbs a neutron, the resulting U-239 isotope then beta decays twice into Pu-239. Pu-239 has a higher probability for fission than U-235, and a larger number of neutrons produced per fission event, resulting in a smaller critical mass. Pure Pu-239 also has a reasonably low rate of neutron emission due to spontaneous fission (10 fission/s-kg), making it feasible to assemble a supercritical mass before predetonation.
In practice, however, reactor-bred plutonium produced will invariably contain a certain amount of Pu-240 due to the tendency of Pu-239 to absorb an additional neutron during production. Pu-240 has a high rate of spontaneous fission events (415,000 fission/s-kg), making it an undesirable contaminant. It is because of this limitation that plutonium-based weapons must be implosion-type, rather than gun-type (see below). Weapons-grade plutonium contains no more than 7% Pu-240; this is achieved by only exposing U-238 to neutron sources for short periods of time to minimize the Pu-240 produced. The critical mass for an unreflected sphere of plutonium is 16 kg, but through the use of a neutron-reflecting tamper the pit of plutonium in a fission bomb is reduced to 10 kg, which is a sphere with a diameter of 10 cm.
Whether plutonium with higher Pu-240 content is usable in a nuclear weapon is not certain from the unclassified literature, but some sources claim that it is possible [2]. Even if technically feasible, such a weapon's yield would be unpredictable and probably much lower than with weapons-grade plutonium given a similarly sophisticated bomb design, and the radioactivity of the Pu-240 would considerably complicate handling.
When compressed as in the implosion method, the critical mass is reduced, so these values do not indicate the amounts needed for a weapon.
Roughly the following values apply: there are 80 generations of the chain reaction, each requiring the time a neutron with a speed of 10,000 km/s needs to travel 10 cm; this takes 80 times 0.01 µs. Thus, the supercritical mass has to be kept together for 0.8 µs.
[edit] Uranium-233
U-233 is an artificially produced isotope, bred from thorium-232 in a nuclear reactor. The fissile properties of U-233 are generally somewhere between those of U-235 and Pu-239. Using U-233 as fissile material is considered a viable approach especially for countries which have only thorium deposits and not uranium.
[edit] Efficiency
The efficiency of a fission weapon is the fraction of the fissile material that actually fissions. The maximum is ca. 25%. For Fat Man it was 14%, for Little Boy only 1.4%. Fusion boosting can increase the fission efficiency to 40%.
[edit] Combination methods
There are two techniques for assembling a supercritical mass. Broadly speaking, one brings two sub-critical masses together and the other compresses a sub-critical mass into a supercritical one.
[edit] Gun method
The simplest technique for assembling a supercritical mass is to shoot one piece of fissile material as a projectile against a second part as a target, usually called the gun-type method. This is roughly how the "Little Boy" weapon which was detonated over Hiroshima worked.
Because of the relatively long amount of time it takes to combine the materials, this method of combination can only be used practically for U-235: predetonation is likely for Pu-239 which has a higher spontaneous neutron release due to Pu-240 contamination. To overcome this, a plutonium gun-type weapon would have to be impractically long to accelerate the plutonium "bullet" to extreme velocities.
For a quick start of the chain reaction at the right moment a neutron trigger / initiator is used, see below.
Although in Little Boy 60 kg of 80% grade U-235 was used (hence 48 kg), the minimum is ca. 20 to 25 kg, versus 15 kg for the implosion method.
For technologically advanced states the method is essentially obsolete, see below. With regard to the risk of proliferation and use by terrorists, the relatively simple design is a concern, as it does not require as much fine engineering or manufacturing as other methods. With enough highly enriched uranium, nations or groups with relatively low levels of technological sophistication could create an inefficient — though still quite powerful — gun-type nuclear weapon.
The scientists who designed the "Little Boy" weapon were confident enough of its likely success that they did not test a design first before using it in war. In any event, it could not be tested before being deployed as there was only sufficient U-235 available for one device.
[edit] Implosion method
The more difficult, but in many ways superior, method of combination is referred to as the implosion method and uses conventional explosives surrounding the material to rapidly compress the mass to a supercritical state. This compression reduces the volume by a factor of 2 to 3.
For Pu-239 assemblies a contamination of only 1% of Pu-240 produces so many spontaneous neutrons that a gun-type device would very likely begin fissioning before full assembly, leading to very low efficiency. For this reason the more technically difficult implosion method must be used for plutonium bombs such as the test bomb used in the "Trinity" shot and the subsequent "Fat Man" weapon detonated over Nagasaki.
Weapons assembled with this method are generally more efficient than the weapons employing the gun method of combination, even ignoring the problem of spontaneous neutrons. The reason that the implosion method is more efficient is because it not only combines the masses, but also increases the density of the mass, and thereby increases the neutron multiplication factor k of the fissionable assembly. Most modern weapons use a hollow plutonium core, or pit, with an implosion mechanism for detonation. Also, so called delta-plutonium (low density Pu) is used due to its high compressibility. [1] [3]
A two-fold increase in the density of the pit will tend to result in a 10-20 kiloton nuclear explosion. A 3-fold compression may produce a 40-45 kiloton nuclear yield, a four fold compression may produce a 60-80 kiloton nuclear yield, and a five-fold compression of the pit which is very hard to get, may produce an 80-100 kiloton nuclear yield. Getting a 5-fold compression of the pit requires a very strong, massive, and very efficient lens implosion system.
This precision compression of the pit creates a need for very precise design and machining of the pit and explosive lenses. To convert spherically expanding shock wave into spherically converging requires a hyperbolic boundary between fast and slow explosives. This in turn requires accurate milling/turning of the surface of pre-molded explosives. The milling machines used are so precise that they could cut the polished surfaces of eyeglass lenses[citation needed]. There are strong suggestions that modern implosion devices use non-spherical configurations as well, such as ovoid shapes ("watermelons").
The primary of a thermonuclear weapon is thought to be a standard implosion method fission bomb, though likely with a core boosted by small amounts of fusion fuel for extra efficiency (see below and Teller-Ulam design).
[edit] Pit
Casting and then machining plutonium is difficult not only because of its toxicity but also because plutonium has many different metallic phases. As plutonium cools, changes in phase result in distortion of the metal. This is normally overcome by alloying it with 3–3.5 molar% (0.9–1.0% by weight) gallium which causes it to take up its delta phase over a wide temperature range.[1] When cooling from molten it then suffers only a single phase change, from epsilon to delta, instead of the four changes it would otherwise pass through. Other trivalent metals would also work, but gallium has a small neutron absorption cross section and helps protect the plutonium against corrosion. A drawback is that gallium compounds themselves are corrosive and so if the plutonium is recovered from dismantled weapons for conversion to plutonium dioxide for power reactors, there is the difficulty of removing the gallium. Modern pits may be composites of plutonium and uranium-235.[1]
Because plutonium is chemically reactive and toxic if inhaled or enters the body by any other means, it is common to plate the completed pit with a thin layer of inert metal. In the first weapons, nickel was used but gold is now preferred.[3]
Pits made of alloys containing a mixture of both plutonium and uranium have been used in the past, and may possibly continue in currently stockpiled designs.
[edit] Explosive lens
It is not sufficient to pack explosive into a spherical shell around the tamper and detonate it simultaneously at several places because the tamper and plutonium pit will simply squeeze out between the gaps in the detonation front. Instead the shock wave must be carefully shaped into a perfect sphere centered on the pit and travelling inwards. This is achieved by using a spherical shell of closely fitting and accurately shaped bodies of explosives of different propagation speeds to form explosive lenses (see also shaped charge).
The lenses must be accurately shaped, chemically pure and homogeneous for precise control of the speed of the detonation front. The casting and testing of these lenses was a massive technical challenge in the development of the implosion method in the 1940s, as was measuring the speed of the shock wave and the performance of prototype shells. It also required electric exploding-bridgewire detonators to be developed which would explode at exactly the same moment so that the explosion starts at the centre of each of the lenses simultaneously (within less than 100 nanoseconds). Once the shock wave has been shaped, there may also be an inner homogeneous spherical shell of explosive to give it greater force, known as a supercharge.
The Fat Man device dropped on Nagasaki used 32 lenses in a pattern of a truncated icosahedron, while more efficient bombs would later use 40, 60, 72, and 92 lenses. The final shape is similar to a soccer ball.
It has been speculated that modern designs may use an American football shaped pit and a mere two-point detonation, i.e. just a single explosive lens at each end. The end result is still formation of a supercritical sphere, but with a vastly superior level of reliability when compared to a weapon requiring dozens of simultaneous detonations.
The exploding-bridgewire detonators were later replaced by slapper detonators, a similar but improved design that is now used in modern weapons, both nuclear and conventional.
[edit] Pusher
The explosion shock wave might be of such short duration that only a fraction of the pit is compressed at any instant as it passes through it. A pusher shell made out of low density metal such as aluminium, beryllium, or an alloy of the two metals (aluminium being easier and safer to shape but beryllium reflecting neutrons back into the core) may be needed and is located between the explosive lens and the tamper. It works by reflecting some of the shock wave backwards which has the effect of lengthening it. The tamper or reflector might be designed to work as the pusher too, although a low density material is best for the pusher but a high density one for the tamper. To maximize efficiency of energy transfer, the density difference between layers should be minimized.
Most U.S. weapons since the 1950s have employed a concept called pit "levitation," whereby an air gap is introduced between the pusher and the pit. The effect of this is to allow the pusher to gain momentum before it hits the core, which allows for more efficient and complete compression. A common analogy is that of a hammer and a nail: leaving space between the hammer and nail before striking greatly increases the compressive power of the hammer (as compared to putting the hammer right on top of the nail before beginning to push).
Many modern nuclear weapons use a hollow sphere of Pu-239, or U-235 that is placed inside of a hollow sphere of beryllium, tungsten carbide, or U-238 that serves as the tamper. This may also be placed inside of a hollow pusher sphere made of aluminium, steel, or other metallic material. Additionally, a gram or so of tritium and/or deuterium gas may be injected into the hollow core prior to implosion to achieve a "boosting" effect from small amounts of nuclear fusion (see below).
[edit] Tamper reflector
A tamper is an optional layer of dense material (typically natural or depleted uranium or tungsten) surrounding the fissile material. It reduces the critical mass and increases the efficiency by its inertia which delays the expansion of the reacting material.
The tamper prolongs the very short time the material holds together under the extreme pressures of the explosion, and thereby increases the efficiency, i.e. the fraction of the fissile material that actually fissions. High density (hence high inertia) is important; tensile strength has a negligible effect. Fortunately for the weapon designer, materials of high density tend to be good reflectors of neutrons.
While the effect of a tamper is to increase the efficiency both by reflecting neutrons and by delaying the expansion of the core, the effect on the efficiency is not as great as the effect on the critical mass. The reason for this is that the process of reflection is relatively time consuming and may not occur extensively before the chain reaction is terminated.
[edit] Neutron reflector
A neutron reflector layer is an optional layer commonly found as the closest layer surrounding the fissile material. This may be the same material used in the tamper, or a separate material. While many tamper materials are adequate reflectors, the best reflector (beryllium metal) makes an extremely poor tamper.
The most efficient reflector is believed to be beryllium metal, then beryllium oxide and tungsten carbide roughly equally efficient, then uranium, then tungsten, then copper, then water, then graphite and iron which are roughly equally efficient. [1]
There is a design tradeoff in choosing to employ a tamper, reflector, or combined material. The weight of the combined pit assembly (any pusher, tamper, reflector, and the fissile material all together) has to be accelerated inwards by the implosion assembly explosives. The larger the pit assembly, the more explosives are needed to implode it to a given velocity and pressure. Early implosion nuclear weapons used heavy pushers and tampers, which were moderately effective reflectors (natural uranium tampers, for example). Levitated or hollow pits increase the energy efficiency of implosion. Using highly efficient, lightweight reflectors made of beryllium further increases the mass efficiency of the implosion system. Such pits are only slightly tamped, and will dissassemble very rapidly once the fission reaction reaches high energy levels.
Before fusion boosting, it was arguable whether the most efficient overall system employed dedicated high mass tampers or not. Now that modern weapons typically use fusion boosting, which increases the reaction rate tremendously, lack of tamper material is no longer a drawback. This has helped allow for the miniaturization of nuclear weapon systems.
[edit] Neutron trigger / initiator
One of the key elements in the proper operation of a nuclear weapon is initiation of the fission chain reaction at the proper time. To obtain a significant nuclear yield of the nuclear explosive, sufficient neutrons must be present within the supercritical core at just the right time. If the chain reaction starts too soon, the result will be only a 'fizzle yield', much below the design specification; if it occurs too late, there may be no yield whatsoever. Several ways to produce neutrons at the appropriate moment have been developed.
Early neutron triggers consisted of a highly radioactive isotope of polonium (Po-210), which is a strong alpha emitter combined with beryllium which will absorb alphas and emit neutrons. This isotope of polonium has a half life of almost 140 days. Therefore, a neutron initiator using this material needs to have the polonium replaced frequently. The polonium is produced in a nuclear reactor.
To supply the initiation pulse of neutrons at the right time, the polonium and the beryllium need to be kept apart until the appropriate moment and then thoroughly and rapidly mixed by the implosion of the weapon. This method of neutron initiation is sufficient for weapons utilizing the slower gun combination method, but the timing is not precise enough for an implosion weapon design. The "Fat Man" weapon of World War II used a finely tooled initiator known as an "urchin", made of alternating concentric layers of beryllium and polonium separated with thin gold foils.
Another method of providing source neutrons is through a pulsed neutron emitter, which is a small ion accelerator with a metal hydride target. When the ion source is turned on to create a plasma of deuterium or tritium, a large voltage is applied across the tube which accelerates the ions into tritium rich metal (usually scandium). The ions are accelerated so that there is a high probability of nuclear fusion occurring. The deuterium-tritium fusion reactions emit a short pulse of 14 MeV neutrons which will be sufficient to initiate the fission chain reaction. The timing of the pulse can be precisely controlled, making it better for an implosion weapon design.
An initiator is not strictly necessary for an effective gun design, as long as the design uses "target capture" (in essence, ensuring that the two subcritical masses, once fired together, cannot come apart until they explode). Initiators were only added to Little Boy late in its design. The use of an initiator can guarantee precise control (to the millisecond) over the timing of the explosion.
[edit] Comparing the two methods
The gun-type method is essentially obsolete and was abandoned by the United States as soon as the implosion method was perfected. Other nuclear powers, such as the United Kingdom, never built any of this type of weapon. As well as only being possible to produce this weapon using highly enriched U-235, the technique has other severe limitations. The implosion technique is much better suited to the various methods employed to reduce the weight of the weapon and increase the proportion of material which fissions.
Gun-type weapons also have safety problems. It is inherently dangerous to have a weapon containing a quantity and shape of fissile material which can form a critical mass through a relatively simple accident. Also, if the weapon falls into water, then the moderating effect of the light water can also cause a criticality accident, even without the weapon being physically damaged. Neither can happen with implosion-type weapons since there is normally insufficient fissile material to form a critical mass without the correct detonation of the lenses.
Implosion-type weapons normally have the pit physically removed from the center of the weapon and only inserted during the arming procedure so that a nuclear explosion cannot occur even if a fault in the firing circuits causes them to detonate the explosive lenses simultaneously as would happen during correct operation. It has also been hypothesized, based on open sources, that the Permissive Action Links for some types of nuclear weapons may involve the use of encoded secret timing offsets for the explosives in a given weapon's combination of explosives and lenses, needed to create a unified focus for the shockfront.
Alternatively, the pit can be "safed" by having its normally-hollow core filled with an inert material such as a fine metal chain, possibly made of cadmium to absorb neutrons. While the chain is in the center of the pit, the pit can't be compressed into an appropriate shape to fission; when the weapon is to be armed, the chain is removed. Similarly, a serious fire will detonate the explosives, destroying the pit and spreading plutonium to contaminate the surroundings (as has happened in several weapons accidents) but cannot possibly cause a nuclear explosion.
The South African nuclear program was probably unique in adopting the gun technique to the exclusion of implosion type devices, and disclosed to the IAEA upon joining that organization that they had built six of these weapons before they abandoned their program and dismantled the weapons.
[edit] Practical limitations of the fission bomb
The most powerful fission bomb was the British Orange Herald with a yield of 720 kt, close to the limit of what is possible. It is technically difficult to keep a large amount of fissile material in a subcritical assembly while waiting for detonation, and it is also difficult to physically transform the subcritical assembly into a supercritical one quickly enough that the device explodes rather than prematurely detonating such that a majority of the fuel is unused (inefficient predetonation). The most efficient pure fission bomb possible would still only consume ~25% of its fissile material before being blown apart, and can often be much less efficient (Fat Man only had an efficiency of 17%, Little Boy only about 1.4% efficient). Large yield, pure fission weapons are also unattractive due to the weight, size, and cost of using large amounts of highly enriched material.
Note that for nuclear weapons in general the energy just from fission is not limited: e.g., the Castle Bravo was a fission-fusion-fission weapon with a yield from fission alone of 10 Mt, and an additional 5 Mt from fusion. Thus, the direct effect of fusion on the yield is, in this case, smaller than the fusion's effect of enabling greater fission.
Another limitation of some fission bomb designs is the need to keep the electronic circuitry within a certain range of temperatures to prevent malfunction. Some weapons were designed with internal heaters to maintain a stable temperature (a method still used by NASA in its space probes); other, more unusual, methods were contemplated by the United Kingdom (see chicken powered nuclear bomb).
[edit] Fusion weapons
Fusion is the combination of two light nuclei, usually isotopes of hydrogen, to form a more stable heavy nucleus and release excess energy. Nuclear weapons which utilize nuclear fusion can have far greater yields than weapons which use only fission, as fusion releases more energy per kilogram and can also be used as a source of fast neutrons to cause fission in depleted uranium. The light weight of the elements used in fusion make it possible to build extremely high yield weapons which are still portable enough to deliver. Compared with large fission weapons, fusion weapons are cheaper and much less at risk of accidental nuclear explosion. The fusion reaction requires the nuclei involved to have a high thermal energy, which is why the reaction is called thermonuclear. The extreme temperatures and densities necessary for a fusion reaction are generated with energy from a fission explosion. A pure fusion weapon is a hypothetical design that does not need a fission primary, but no weapons of this sort have ever been developed.
[edit] Boosting
The simplest way to utilize fusion is to put a mixture of deuterium and tritium inside the hollow core of an implosion style plutonium pit (which usually requires an external neutron generator mounted outside of it rather than the initiator in the core as in the earliest weapons). When the imploding fission chain reaction brings the fusion fuel to a sufficient pressure, a deuterium-tritium fusion reaction occurs and releases a large number of energetic neutrons into the surrounding fissile material. This increases the rate of burn of the fissile material and so more is consumed before the pit disintegrates. The efficiency (and therefore yield) of a pure fission bomb can be doubled (from about 20% to about 40% in an efficient design) through the use of a fusion boosted core, with very little increase in the size and weight of the device. The amount of energy released through fusion is only around 1% of the energy from fission, so the fusion chiefly increases the fission efficiency by providing a burst of additional neutrons.
Boosting is typically done with a deuterium/tritium mixture in gas form which is pumped into the core during the arming sequence from an exterior reservoir. Tritium has a short half life (12.3 years), is very expensive and is very chemically reactive with uranium and plutonium. Having the tritium reservoir outside of the bomb allows easy replenishment and removal of waste Helium-3 without having to take the bomb core apart. (Theoretically, there are ways a solid hydride or a deuterium/tritium liquid could be used instead, but the use of gas is almost universal.)
Fusion boosting provides two strategic benefits. The first is that it obviously allows weapons to be made much smaller, lighter, and use less fissile material for a given yield, making them cheaper to build and deliver. The second benefit is that it can be used to render weapons immune to radiation interference (RI). It was discovered in the mid-1950s that plutonium pits would be particularly susceptible to partial pre-detonation if exposed to the intense radiation of a nearby nuclear explosion (electronics might also be damaged, but this was a separate issue). RI was a particular problem before effective early warning radar systems because a first strike attack might make retaliatory weapons useless. Boosting can reduce the amount of plutonium needed in a weapon to below the quantity which would be vulnerable to this effect.
While this technique, sometimes known as "gas boosting," uses fusion — the reaction associated with the so-called “hydrogen bomb” — it is still seen as simply boosting a "fission" bomb. In fact, fusion boosting is very common and used in most modern weapons, including the fission primaries in most thermonuclear weapons.
- See also: Layer cake, Joe 4, ("Alarm Clock").
[edit] Staged thermonuclear weapons
Staged thermonuclear weapons, also known as hydrogen bombs, utilize the power of a fission bomb to ignite fusion fuel. They are considered "staged" in that they chain together different weapon components for increasingly large explosions.
The basic principles behind modern thermonuclear weapons design were developed independently by scientists in different countries. Edward Teller and Stanislaw Ulam at Los Alamos worked out the idea of staged detonation coupled with radiation implosion in what is known in the United States as the Teller-Ulam design in 1951. Soviet physicist Andrei Sakharov independently arrived at the same answer (which he called his "Third Idea") in 1955.
The full details of staged thermonuclear weapons have never been fully declassified and among different sources outside the wall of classification there is no strict consensus over how exactly a hydrogen bomb works. The basic principles are revealed through two separate declassified lines by the US Department of Energy: "The fact that in thermonuclear (TN) weapons, a fission 'primary' is used to trigger a TN reaction in thermonuclear fuel referred to as a 'secondary'" and "The fact that, in thermonuclear weapons, radiation from a fission explosive can be contained and used to transfer energy to compress and ignite a physically separate component containing thermonuclear fuel."
The process by which the “secondary” (fusion) stage is compressed by the x-rays from the “primary” (fission) stage is known as “radiation implosion.” Its exact operation has never been declassified though a number of theories have been put forward by people outside the classified domain, based on speculation, declassified information, interviews with former weapons scientists, and independent theoretical calculations.
One approach often cited, following on the 1979 court case of United States v. The Progressive (which sought to censor an article about the workings of the hydrogen bomb; the government eventually dropped the case and much new information about the weapon was declassified), is as follows:
A fission weapon (the "primary") is placed at one end of the warhead casing. When detonated, it first releases X-rays at the speed of light. These are reflected from the casing walls, which are made of heavy metals and serve as X-ray mirrors. The X-rays travel into a space surrounding the secondary, which is a column or sphere of lithium deuteride fusion fuel encased by a natural uranium "tamper"/"pusher". Here, the X-rays cause a pentane-impregnated polystyrene foam filling the case to convert into a plasma, and the X-rays cause ablation of the surface of the jacket surrounding the secondary, imploding it with enormous force. Inside the secondary is a "sparkplug" of either enriched uranium or plutonium, which is caused to fission by the compression, and begins its own nuclear explosion. Compression of the fusion fuel and the high temperature caused by the fission explosion cause the deuterium to fuse into helium and emit copious neutrons. The neutrons transmute the lithium to tritium, which then also fuses and emits large amounts of gamma rays and more neutrons. The excess neutrons then cause the natural uranium in the "tamper", "pusher", case and x-ray mirrors to undergo fission as well, adding more power to the yield. This last effect can greatly increase both the yield of the device and the amount of fission-related fallout. Non-fissionable materials (lead, tungsten, etc.) can be used in the tamper/pusher and case instead of fissionable ones (uranium or thorium), reducing the yield and the fallout accordingly.
Others have questioned the "foam" mechanism of radiation implosion described above, and instead indicated that the actual mechanism that compresses the secondary stage is neither the "radiation pressure" of the x-rays, nor the physical pressure of the plasmatized foam, but suggest rather that only the x-ray radiation 'burning' the outside surface of the tamper/pusher away. X-rays surround and heat the whole outside of the tamper/pusher until the outside layer of it ablates/explodes away from the secondary in all directions, creating an inward "ablation pressure." In other words, heated by x-rays, the outside layers of the tamper/pusher explode outward, like a rocket, driving the remaining layers inward in an implosion.
Modern nuclear weapons probably use fusion stages that are spherical, rather than cylindrical. [2]
[edit] Advanced thermonuclear weapons designs
The largest modern fission-fusion-fission weapons include a fissionable outer shell of U-238, the more inert waste isotope of uranium, or X-ray mirrors constructed of polished U-238. This otherwise-inert U-238 would be detonated by the intense fast neutrons from the fusion stage, increasing the yield of the bomb many times. For example, in the Castle Bravo test, the largest US test ever, of the total 15 megaton yield, 10 megatons were from fission of the natural uranium tamper. For even higher yield, however, moderately enriched uranium can be used as a jacket material.
For the purposes of miniaturization of weapons (fitting them into the small re-entry vehicles on modern MIRVed missiles), it has also been suggested that many modern thermonuclear weapons use spherical secondary stages, rather than the column shapes of the older hydrogen bombs. In 1999, it also became known that certain advanced U.S. thermonuclear designs used non-spherical (oblate) primaries.
Three-stage thermonuclear devices have also been developed, whereby a third, larger fusion stage (a "tertiary") is compressed by the energy of the fusion "secondary" (described above). A three-stage bomb, the Mk 41, was deployed by the United States, and the USSR’s Tsar Bomba was also a three stage weapon. In theory, there is no limit to how many stages could be added. Though there is currently no need for five- or six-stage weapons with yields that could approach a gigaton, they could possibly be of use in deflecting Near-Earth Objects such as Asteroids and Comets which are in danger of colliding with the Earth and large enough to do significant damage (have high Torino Scale values).
The cobalt bomb uses cobalt in the shell, and the fusion neutrons convert the cobalt into cobalt-60, a powerful long-term (5 years) emitter of gamma rays, which produces major radioactive contamination. In general this type of weapon is a salted bomb, and variable fallout effects can be obtained by using different salting isotopes. Gold has been proposed for short-term fallout (days), and tantalum and zinc for fallout of intermediate duration (months). To be useful for salting, the parent isotopes must be abundant in the natural element, and the neutron-bred radioactive product must be a strong emitter of penetrating gamma rays.
The primary purpose of this weapon is to create extremely radioactive fallout to deny a region to an advancing army, a sort of wind-deployed mine-field. No cobalt weapons have ever been atmospherically tested, and as far as is publicly known none have ever been built. A number of very "dirty" thermonuclear weapons, however, have been developed and detonated, as the final fission stage (usually a jacket of natural or enriched uranium) is itself sometimes analogous to "salting" (for example, the Castle Bravo test). The British did test a bomb that incorporated cobalt as an experimental radiochemical tracer (Antler/Round 1, 14 September 1957). This 1-kt device was exploded at the Tadje site, Maralinga range, Australia. The experiment was regarded as a failure and was not repeated.
The thought of using cobalt, which has the longest half-life of the feasible salting materials, caused Leó Szilárd to refer to the weapon as a potential doomsday device. With a five-year half-life, people would have to remain shielded underground for a very long time until it was safe to emerge, effectively wiping out humanity. However, no nation has ever been known to pursue such a strategy. The movie Dr. Strangelove famously incorporated such a doomsday weapon as a major plot device.
Another variant of the thermonuclear weapon is the enhanced radiation weapon, or neutron bomb, which are small thermonuclear weapons in which the burst of neutrons generated by the fusion reaction is intentionally not absorbed inside the weapon, but allowed to escape. The X-ray mirrors and shell of the weapon are made of chromium or nickel so that the neutrons are permitted to escape. The intense burst of high-energy neutrons is the principal destructive mechanism. Neutrons are more penetrating than other types of radiation, so many shielding materials that work well against gamma rays do not work nearly as well. The term "enhanced radiation" refers only to the burst of ionizing radiation released at the moment of detonation, not to any enhancement of residual radiation in fallout (as in the salted bombs discussed above).
Nuclear bombs are capable of creating a destructive electromagnetic pulse (EMP) on a wide scale. The Soviet Union conducted significant research into producing nuclear weapons specially designed for upper atmospheric detonations, a decision that was later followed by the U.S. and the UK. Only the Soviets ultimately produced any significant quantity of such warheads, most of which were disarmed following the Reagan-era arms talks. EMPs can also be created by non-nuclear electromagnetic bombs.
[edit] Miniaturization
The first nuclear weapons were large, idiosyncratic devices weighing many tons that could be dropped only out of especially large aircraft as gravity bombs. In the years following World War II though, developments in rocketry spurred efforts to reduce the size of nuclear weapons so that they could fit on a missile. Soon, miniaturization of weapons proved a major investment of nations with nuclear weapons and was one of the primary justifications for programs of nuclear testing, which provide the data necessary for advancing nuclear-weapons design. Weapons systems that require relatively small thermonuclear weapons, such as MIRVed missiles, are thought to be achievable only with many tests. The smallest nuclear warhead deployed by the United States was the W54, which was used in the Davy Crockett recoilless rifle; warheads in this weapon weighed about 23 kg and had yields of 0.01 to 0.25 kilotons. This is small in comparison to thermonuclear weapons, but remains a very large explosion with lethal acute radiation effects and potential for substantial fallout. It is generally believed that the W54 may be nearly the smallest possible nuclear weapon, though this is debated.
In 16 years, the US went from the Mark III nuclear weapon (Fat Man design), which was roughly 60 inches(1.5 meters) in diameter and weighed roughly 10,300 pounds (4,700 kilograms), to the W54 design, less than approximately 11 inches (28 centimeters) diameter and weighing about 51 pounds (23 kilograms), a factor of 162 times smaller volume and over 200 times lighter. The Mark III had a yield of 21 kilotons, while the W54 design was tested up to 6 kilotons; the W54's yield is a factor of 46 times greater per unit volume and 56 times greater per unit mass. The W54 warhead could fit inside the explosive lens assembly of the Mark III.
It has been suggested that the Soviet Union's lack of miniturization technology in the 1950's was directly responsible for their early advances in the space race. Since they were unable to reduce the size of their weapons to the same degree as the U.S., they were forced to build larger missiles to deliver them. It was these large missiles that allowed the USSR to put satellites and humans into orbit before the U.S.
[edit] Stockpile stewardship
After the Cold War, most nuclear powers have stopped conducting programs of nuclear testing, primarily for political reasons. In many countries, inability to test has led to questions about the safety and reliability of aging nuclear weapons systems. In the U.S., a program of "stockpile stewardship"—managed by the Los Alamos National Laboratory and Lawrence Livermore National Laboratory—has attempted to gauge the reliability of old warheads without full nuclear testing, often by using computer simulation.
[edit] References
[edit] Specific
- ^ a b c d "Restricted Data Declassification Decisions from 1946 until Present", accessed Sept 23, 2006
- ^ A Fresh Examination of the Proliferation Dangers of Light Water Reactors. The Nonproliferation Policy Education Center (2004-10-22). Retrieved on 2006-11-16.
- ^ a b Fissionable Materials section of the Nuclear Weapons FAQ, Carey Sublette, accessed Sept 23, 2006
[edit] General
- Glasstone, Samuel and Dolan, Philip J., The Effects of Nuclear Weapons (third edition), U.S. Government Printing Office, 1977. PDF Version
- Cohen, Sam, The Truth About the Neutron Bomb: The Inventor of the Bomb Speaks Out, William Morrow & Co., 1983
- Grace, S. Charles, Nuclear Weapons: Principles, Effects and Survivability (Land Warfare: Brassey's New Battlefield Weapons Systems and Technology, vol 10)
- Smyth, Henry DeWolf, Atomic Energy for Military Purposes, Princeton University Press, 1945. (see: Smyth Report)
- The Effects of Nuclear War, Office of Technology Assessment (May 1979).
- Rhodes, Richard. Dark Sun: The Making of the Hydrogen Bomb. Simon and Schuster, New York, (1995 ISBN 0-684-82414-0)
- Rhodes, Richard. The Making of the Atomic Bomb. Simon and Schuster, New York, (1986 ISBN 0-684-81378-5)
[edit] External links
- Carey Sublette's Nuclear Weapon Archive is a reliable source of information and has links to other sources.
- Nuclear Weapons Frequently Asked Questions: Section 4.0 Engineering and Design of Nuclear Weapons
- The Federation of American Scientists provide solid information on weapons of mass destruction, including nuclear weapons and their effects
- Globalsecurity.org provides a well-written primer in nuclear weapons design concepts (site navigation on righthand side).
- More information on the design of two-stage fusion bombs
- Militarily Critical Technologies List (MCTL) from the US Government's Defense Technical Information Center
- "Restricted Data Declassification Decisions from 1946 until Present", Department of Energy report series published from 1994 until January 2001 which lists all known declassification actions and their dates. Hosted by Federation of American Scientists.
